Material with a higher mechanical strength, stiffness, heat and wear resistance than Ertalon 6 SA. It also has a better creep resistance but its impact strength and mechanical damping ability is reduced. Well suited for machining on automatic lathes. Please note that the Ertalon 66 SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin [see the property values given on page 79 under Ertalon 66 SA-C].
Additionally, Ertalon 66 SA stock shapes are also available in our Food Grade programme, which means that they can be supplied with a declaration of compliance, confirming they comply with the requirements mentioned in the European Regulations (EC) No 1935/2004 and (EU) 10/2011. The composition of the raw materials used for the manufacture of Ertalon 66 SA stock shapes also comply with the regulations of the United States of America [FDA] for plastic materials and articles intended to come into contact with foodstuffs.
| Format | |
| Color | |
| Measure | |
| Measure 1 | |
| Measure 2 | |
| Length | Val. Máx.: |
| Width | Val. Máx.: |
| Lote | |
| Quantity | |
| Result: | |
MAIN CHARACTERISTICS
- Higher mechanical resistance to heat and wear than ERTALON® 6 SA
- Increased creep resistance
- Easier machining
- Lower damping power
- Good slip properties
- Good electrical insulation properties
- Good resistance to high energy radiations (Gamma and X Rays)
ApPlicaTIONS
- Automatic lathes machining
- Sprockets of high modules
- Wheels and rollers
- Bushings
- Separators
- Large parts subject to high loads
